Serving the Waco area  ·  (254) 384-8413  ·  Open Mon-Sun 7am-7pm
📞 (254) 384-8413 Free Quote

Metal Roofing in Bellmead, TX (76705) · Local Professionals

Waco Metal Roofing · Fast response in Bellmead and the Waco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Bellmead runs along the north side of Waco where Interstate 35 meets Loop 340, and the housing stock here tells the story: 1950s and 1960s brick ranches on compact lots, older frame homes near the original Bellmead townsite, and a growing number of metal shops and barns out toward the Blackland Prairie edges. The sun hits hard here, and it shows on roofs that have baked for decades.

When Bellmead homeowners in 76705 call us, it is usually because a metal roof has faded, a fastener has backed out, or a spring storm has lifted a panel. We are based in Waco and work Bellmead every week, so we know the drive, the lots, and the local rules. Waco Metal Roofing is a Metal Roofing Alliance member, and our crews are fully insured.

Metal Roofing in Bellmead (76705)

Bellmead sits on clay-heavy soil that shifts with our wet and dry cycles, and that movement shows up at flashings and penetrations. Most properties here are single-story ranches with low-slope sections over porches and additions, plus detached shops and garages out back. Access can be tight on the older streets near Bellmead Drive, and we plan panel delivery and staging around driveways and alleyways rather than assuming a big open lot. The intense Central Texas sun is the main enemy: it fades painted panels, dries out sealants, and cooks shingles until they curl. Spring supercells bring large hail and straight-line winds that test every seam and screw. We also see ice damming at the eaves on the occasional hard freeze, like February 2021, especially on homes with minimal attic insulation.

Our team has worked metal roofs across McLennan County for years, from standing seam on modern farmhouses to corrugated panels on agricultural buildings. We know what fails first here and how to fix it without overselling a full replacement.

Our services in Bellmead

How a Job Works in Bellmead

Step 1: Call us at (254) 384-8413 or request a free estimate online. We schedule an on-site assessment, inspect the roof, check fasteners, seams, and flashing, and talk through repair versus replacement. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and coordinate any HOA or historic review if it applies. On tight Bellmead lots, we stage materials in the driveway or on the street according to city rules and keep the crew moving so the roof is watertight each day. Most residential re-roofs take a few days depending on size and weather.

Step 3: We clean up nails with magnets, haul away old material, and walk the property with you. You see the finished work, we answer questions, and we leave the yard as clean as we found it.

Pricing in Bellmead depends on roof size, pitch, access, and condition. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and retrofitting over existing shingles around $7. Repairs and leak fixes start around $450, screw replacement and re-fastening around $750, and coating or painting around $2.50 per square foot. Flashing and chimney work starts around $600, and gutters for metal roofs run about $9 per linear foot. Storm damage inspections are free. The biggest cost factors are square footage, how many layers are coming off, tight access, and urgency after a storm. Call (254) 384-8413 for a free estimate specific to your Bellmead property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Bellmead and nearby areas.

My metal roof on a 1960s ranch near Bellmead Drive is faded and chalky. Can it be coated instead of replaced?
Often yes. If the panels are structurally sound and the fasteners are not failing, a metal roof coating can restore color and add a reflective layer that helps with the Central Texas sun. We inspect first to confirm the substrate is a good candidate, then prep and apply. If panels are rusted through or seams are separating, repair or replacement makes more sense.
A storm just peeled back panels on my shop off Loop 340. How fast can you get out?
We prioritize active leaks and storm damage in Bellmead. Call (254) 384-8413 and we will schedule an inspection, often same or next day depending on call volume. We can tarp or secure the area to prevent further water intrusion, then provide a written repair estimate.
What does a typical metal roof repair cost in Bellmead?
Most repairs start around $450 for leak diagnosis and fixes, and screw replacement or re-fastening starts around $750. The final price depends on roof access, how many penetrations are involved, and whether flashing or panels need replacement. We give you a firm number before work begins.
Do I need a permit to replace my roof in Bellmead?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We recommend confirming with the City of Bellmead through https://www.mclennan.gov before work starts. We handle the permit application and inspection coordination as part of the job.
My neighbor's tree limbs hang over my roof line. What can I do about property lines and HOA rules?
In Texas, you generally have the right to trim limbs that cross onto your property, but not to damage the neighbor's tree. If you are in an HOA, review the architectural rules before changing roof color or profile. We can provide product specs and color samples to help with HOA approval.
Are you insured for work on my Bellmead property?
Yes. We carry general liability insurance and workers' compensation coverage, and we can provide certificates before work starts. That protects you and your property if anything goes wrong on the job.
What maintenance should I do on a metal roof in Bellmead to make it last?
Check fasteners and sealant at penetrations once a year, especially after spring hail season. Keep gutters clear of live oak and pecan debris. Touch up scratches before rust starts. If you see loose panels or ceiling stains, call us for an inspection rather than waiting for the next storm.
Why choose us?

Trusted professionals in Waco

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Waco

All your work handled by qualified professionals in Waco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Waco

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Waco · Response within 24h · No commitment · ☎ (254) 384-8413

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Waco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm