Serving the Waco area  ·  (254) 384-8413  ·  Open Mon-Sun 7am-7pm
📞 (254) 384-8413 Free Quote

Metal Roofing in Waco, TX (76701) · Local Professionals

Waco Metal Roofing · Fast response in Waco and the Waco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Waco's housing stock tells the story of a century of weather, from Queen Anne Victorians in Castle Heights to the modern white board-and-batten farmhouses with black standing seam roofs that this city made famous. If you own one of those homes, or a brick ranch off Franklin Avenue or a shop building out toward China Spring, you already know what hail, straight-line wind, and a Texas summer do to a roof.

We are Waco Metal Roofing, based right here in 76701, and we install, repair, and replace metal roofs across Waco and the surrounding towns. When a spring supercell rolls up the Brazos and drops golf-ball hail on your panels, or a pecan limb punches through a barn roof off Highway 6, you want a crew that knows the neighborhoods, not a call center in another time zone.

Metal Roofing in Waco (76701)

The ground here changes fast. Castle Heights and Sanger Heights sit on older lots with mature live oaks and cedar elms whose roots and low canopies crowd the roofline, so panel delivery and staging take planning. Out in Woodway, Hewitt, and Lorena, you get larger lots and steeper two-story roofs where fall protection and gutter alignment matter more than tight access. Along the Brazos and Bosque bottomlands, barns and shops sit on Blackland Prairie clay that swells after rain, which is why we check fascia and flashing attachment, not just the panels. And the failure mode that dominates in Waco is hail and wind, not salt air or fog: dented panels, lifted edges, and fasteners backed out after a supercell. Summer heat bakes sealant and expands long panel runs, so we spec for thermal movement on every install.

Our team has worked roofs from the 1890s Victorians near Baylor to new construction in China Spring. We are a Metal Roofing Alliance Member, and our crews are fully insured with general liability and workers' compensation.

Our services in Waco

How a Job Works in Waco

Step 1: you call (254) 384-8413 and we set a free on-site assessment. We walk the roof, check flashings and fasteners, look at attic ventilation, and take photos. If storm damage is involved, we document what we find for your insurance file, though coverage is always the carrier's call.

Step 2: we schedule the work and pull the required roofing permit through the local building department. In historic districts and HOA neighborhoods, we coordinate panel profile and color approval before ordering material. On tight Castle Heights lots, we stage panels on the driveway or street per city rules so we do not block neighbors.

Step 3: we clean the site daily, magnet-sweep for screws and metal shavings, and do a final walkthrough with you. We leave your property clean and show you the completed work before we go.

Pricing in Waco depends on roof size, pitch, access, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Storm and wind damage inspections are free. Call (254) 384-8413 for a free estimate on your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Waco and nearby areas.

My Castle Heights Victorian has a steep, complex roof with dormers and a wraparound porch. Can you handle standing seam on that?
Yes. Older Waco homes like the ones in Castle Heights and Sanger Heights often have multiple valleys, dormers, and porches. We measure and fabricate panels to fit those transitions, and we pay close attention to flashing at porch roof intersections, which is where leaks usually start on these homes.
A storm just peeled back panels on my shop roof near China Spring. How fast can you respond?
Call (254) 384-8413 and we will schedule a free storm and wind damage inspection. For active leaks or open roofs, we prioritize temporary protection and then permanent repair. We document damage with photos for your insurance claim, but coverage decisions rest with your carrier.
What does a typical metal roof replacement cost for a brick ranch in north Waco?
Most ranch replacements fall in the $9 per square foot range for replacement, though size, pitch, and whether we remove existing layers affect the final number. A retrofit over shingles can start at $7 per square foot if the existing roof qualifies under code. We give you a written estimate after the free inspection.
Do I need a permit to re-roof my house in Waco, and where do I check the rules?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. The City of Waco website is the right place to confirm current rules, and we handle the permit pull for you as part of the job.
My HOA requires a specific roof color, and my neighbor says my new panels cross the property line. What do I do?
We coordinate HOA design review and color approval before ordering panels, so you are not stuck with material that violates the covenants. On property lines, we set panels and gutters within your boundary and recommend a survey if the line is unclear. We do not install over a neighbor's property.
Are you insured for work on my Waco property?
Yes. We carry general liability and workers' compensation insurance, and we can provide a certificate of insurance before work starts. Our crews are fully insured, so you are not exposed if someone is injured on the job.
What maintenance does a metal roof need in Waco's heat and hail?
Check fasteners and sealant annually, especially after spring hail season. Look for backed-out screws, lifted panel edges, and worn sealant at flashings. We offer inspection and re-fastening starting at $750, and coating can extend the life of older panels. After a hard freeze like February 2021, check eaves for ice damming and loose trim.
Why choose us?

Trusted professionals in Waco

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Waco

All your work handled by qualified professionals in Waco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Waco

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Waco · Response within 24h · No commitment · ☎ (254) 384-8413

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Waco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm