Serving the Waco area  ·  (254) 384-8413  ·  Open Mon-Sun 7am-7pm
📞 (254) 384-8413 Free Quote

Metal Roofing in Mart, TX (76664) · Local Professionals

Waco Metal Roofing · Fast response in Mart and the Waco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Mart is a farm town where the Blackland Prairie meets the Brazos River bottomland, and the roofs here have to handle both. The housing stock runs from older farmhouses and brick ranches in town to barns, shops, and equipment sheds on acreage out toward the river. If you live near Mart High School or drive the stretch of Highway 164 through town, you already know how fast a spring storm can roll in off the prairie.

That is why property owners in Mart (76664) call Waco Metal Roofing. We install, repair, and replace metal roofs built for hail, straight-line wind, and the intense summer sun that hits this part of McLennan County. Whether it is a house on a shaded lot or a barn with a failing panel roof, our team knows the local conditions and builds for them.

Metal Roofing in Mart (76664)

Mart sits on the Blackland Prairie, and the ground here is heavy clay that swells and shrinks with the seasons. That matters for roof work because grade and drainage around barns and shops often shift, and water can pool at the foundation or back up under the eaves. Out toward the Brazos River bottomland, lots are larger and access can be tight for equipment, especially after rain. Many properties in and around Mart have mature pecans and live oaks, which means fallen limbs and leaf debris are a real threat to panels and gutters. The older homes near the center of town often have steep pitches and layered shingles, while the newer farmhouse-style builds call for clean standing seam. We match the panel profile and fastening method to the building, not the other way around.

Our team has worked across Waco and the surrounding communities, including Mart, Hewitt, and Lorena. We understand how hail and wind behave on the prairie, and we know that a barn roof is not the same job as a house roof. We bring the right crews and the right materials for both.

Our services in Mart

How a Job Works in Mart

Step 1: You call (254) 384-8413 or request a free estimate online. We schedule an on-site assessment at your Mart property, inspect the roof and attic if accessible, and talk through what you are seeing. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the work. In Mart, that often means coordinating around farm equipment, livestock, or tight driveway access. Our insured crews handle everything from tear-off and decking repair to panel installation, flashing, and fastener replacement. If your property is in a historic district or under an HOA, we help you understand the design review requirements before ordering materials.

Step 3: We clean up the site daily and do a final walkthrough with you. Magnets sweep the yard for nails, and we make sure gutters and downspouts are clear. You get a written warranty and a roof that is ready for the next Texas storm.

Metal roofing in Mart is priced by the square foot, and the final number depends on the size and pitch of your roof, the condition of the decking, access to the property, and how soon you need the work done. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. A basic metal roof repair or leak repair starts around $450, and screw replacement and re-fastening starts around $750. Commercial and agricultural metal roofing is quoted per project. We give free estimates in Mart and the surrounding area, so call (254) 384-8413 to get a real number for your roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in Mart and nearby areas.

My barn near the Brazos River bottom has panels pulling loose after the last wind storm. Can you re-fasten them?
Yes. Screw replacement and re-fastening is one of our most common jobs on Mart barns and shops. We replace failed fasteners with the correct screws and washers for the panel profile, check the seams and flashing, and make sure the panels are secured for the next round of straight-line winds. We can also inspect for hidden damage from fallen limbs or hail.
A storm just took off part of my roof in Mart. How fast can you get out there?
Call (254) 384-8413 as soon as it is safe to do so. We offer free storm and wind damage inspections and can often schedule an assessment within a day or two, depending on how many calls are coming in across McLennan County. We document the damage for your insurance claim and can install temporary protection if the roof is open.
What does a metal roof cost for a typical Mart home or barn?
For a house, most metal roof installations in Mart fall between $8 and $12 per square foot depending on the panel type and roof complexity. Barns and shops with simple gable roofs often cost less per square foot because there are fewer penetrations and easier access. Repair work starts around $450, and we always provide a free written estimate before any work begins.
Do I need a permit to replace my roof in Mart?
Roofing permits are commonly required for a full replacement or re-roof in Mart and McLennan County, and the rules can vary by jurisdiction. We recommend checking with the City of Mart through the McLennan County website at https://www.mclennan.gov or calling the local building department before you start. We handle the permit application as part of your project and make sure the work meets current code.
My neighbor says my new metal roof panels overhang the property line. What should I do?
Property line disputes are best resolved before materials are ordered. We can review your survey and adjust the roof layout so the overhang stays within your property. If you are in an HOA, we also help you submit the design review paperwork for panel profile and color before installation begins.
Are you insured for work on my Mart property?
Yes. Waco Metal Roofing is fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start work on your home, barn, or commercial building in Mart.
What maintenance does a metal roof need in Mart to survive the summer and spring storms?
Check the fasteners and seams once a year, especially after hail or high wind. Keep pecans and live oak limbs off the roof and gutters. In Mart, the intense sun and clay soil movement can work screws loose over time, so a quick inspection in spring before storm season and again in fall is smart. We offer free metal roof inspections and can replace worn screws and washers before they become leaks.
Why choose us?

Trusted professionals in Waco

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Waco

All your work handled by qualified professionals in Waco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Waco

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Waco · Response within 24h · No commitment · ☎ (254) 384-8413

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Waco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm