Serving the Waco area  ·  (254) 384-8413  ·  Open Mon-Sun 7am-7pm
📞 (254) 384-8413 Free Quote

Metal Roofing in Beverly Hills, TX (76711) · Local Professionals

Waco Metal Roofing · Fast response in Beverly Hills and the Waco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Beverly Hills is a small, established neighborhood tucked into south Waco, just off the I-35 frontage and a short drive from the McLennan County Courthouse. Most of the homes here are post-war brick ranches and modest bungalows from the 1940s through the 1970s, sitting on compact lots with mature pecans and live oaks that drop limbs every time a spring storm rolls through.

When your roof starts leaking after a hail event or you notice washers cracking from the summer heat, you want a crew that knows these streets and these roofs. Waco Metal Roofing serves Beverly Hills (76711) and the surrounding Waco area, and we have worked on enough of these older homes to know where the trouble spots hide, from failing fasteners on the back slope to flashing gaps around the original brick chimneys.

Metal Roofing in Beverly Hills (76711)

Beverly Hills sits on gently sloping ground that drains toward the Brazos River bottom, and after a heavy rain you can see exactly where the water wants to go. The older homes here often have shallow roof pitches and original decking that has seen decades of Texas sun, which means we pay close attention to the underlayment and fastening pattern before we ever set a panel. Tight lot lines and carports close to the fence make access tricky, so we plan material staging carefully to avoid tearing up your yard or your neighbor's. The big temperature swings between a 100-degree July and a February freeze like 2021 are hard on sealants and washers, and that is the failure we see most often on metal roofs in this ZIP code.

Our team has installed, repaired, and replaced metal roofs across Waco and McLennan County, from the brick ranches of Beverly Hills to the farmhouse-style homes that have become so popular around town. We are a Metal Roofing Alliance member and fully insured, so you are covered from the first inspection to the final walkthrough.

Our services in Beverly Hills

How a Job Works in Beverly Hills

Step 1: You call us at (254) 384-8413 or request a free estimate online, and we schedule an on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and take a look at your gutters and attic ventilation. You get a written scope with pricing before any work begins, and we answer every question you have about materials and timing.

Step 2: Once you approve, we pull the required roofing permit through the local building department and coordinate any HOA or historic review if your property falls under one. On the job, we protect your landscaping, stage materials on the driveway or street side, and keep the work area tidy. For older Beverly Hills homes, we often find soft decking or worn flashing that needs attention, and we show you photos before we make any changes.

Step 3: When the last panel is set and the flashing is sealed, we clean up completely, haul away old materials, and walk the roof with you. We do not leave until you have seen the finished work and know exactly what was done.

Pricing in Beverly Hills depends on the size and pitch of your roof, the condition of the decking, access around the lot, and how soon you need the work done. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Smaller jobs like a metal roof repair or leak repair start at $450, screw replacement and re-fastening at $750, and gutter work for metal roofs at $9 per linear foot. We give free estimates and explain exactly what drives the number, so you can plan with confidence. Call (254) 384-8413 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Beverly Hills and nearby areas.

My 1950s ranch in Beverly Hills has a low-slope roof and original decking. Can you install metal over it?
Often yes, but we need to inspect the decking first. Low-slope roofs in this part of Waco can hold moisture, and if the boards are soft or delaminated we will recommend repairs before any panel goes down. We also check that the existing layers meet code limits for a retrofit, since Texas rules cap how many layers you can recover over.
A storm just peeled back panels on my roof in Beverly Hills. How fast can you get out?
We prioritize active leaks and storm damage in Beverly Hills and the surrounding Waco area. Call (254) 384-8413 and we will schedule an inspection, usually within a day or two depending on storm volume. We can tarp or secure the roof to prevent further water damage while we prepare a repair estimate.
What does a typical metal roof repair cost in Beverly Hills?
Most repairs start at $450, and the final price depends on what we find. A simple flashing repair is on the low end, while multiple failed fasteners, separated seams, or damaged panels push the number higher. We give you a written estimate before we start, and we do not add surprise charges.
Do I need a permit for a metal roof in Beverly Hills?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We handle the permit application for you and make sure the work meets local inspection requirements. For specific questions about your property, the City of Beverly Hills website (https://www.mclennan.gov) is the best place to confirm current rules.
My neighbor's tree hangs over my roof in Beverly Hills. Who is responsible for the damage if a limb falls?
In Texas, a limb that falls from a neighbor's tree onto your roof is generally your responsibility to clean up and repair, unless the tree was known to be diseased or hazardous and the neighbor was negligent. We can document the damage for your insurance claim. If you are in an HOA, check your covenants first, because some associations have rules about tree maintenance and roof color changes.
Are you insured for work on my Beverly Hills home?
Yes. We carry general liability insurance and workers' compensation coverage, and we are happy to provide proof before we start. That protects you if anything goes wrong on your property and covers our crew while they are on your roof.
What should I do to maintain my metal roof in Beverly Hills between storms?
After every major hail or wind event, walk your yard and look for granules, screws, or panel pieces on the ground. Keep gutters clear of pecan leaves and debris, especially before spring storms. Once a year, have someone check the fasteners and sealant, because the freeze-thaw cycles here crack old sealant. We offer free inspections if you want a professional eye on it.
Why choose us?

Trusted professionals in Waco

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Waco

All your work handled by qualified professionals in Waco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Waco

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Waco · Response within 24h · No commitment · ☎ (254) 384-8413

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Waco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm