Serving the Waco area  ·  (254) 384-8413  ·  Open Mon-Sun 7am-7pm
📞 (254) 384-8413 Free Quote

Metal Roofing in McGregor, TX (76657) · Local Professionals

Waco Metal Roofing · Fast response in McGregor and the Waco area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

McGregor sits just southwest of Waco where the Blackland Prairie rolls into the Brazos River bottomland, and the mix of older in-town homes, working farms, and metal barns and shops is exactly the kind of roofing landscape we know well. From the tree-lined blocks near downtown to the rural properties out toward the McLennan County line, roofs here take a beating from intense summer sun, spring hail, and the occasional hard freeze.

Homeowners and property managers in McGregor (76657) call Waco Metal Roofing because we understand both sides of this town: the residential streets where a clean standing seam or stone-coated steel roof has to look right, and the acreage where a barn or shop needs corrugated panel that stands up to wind and weather. We are a Metal Roofing Alliance member, fully insured, and we serve McGregor as part of our Waco and surrounding areas coverage.

Metal Roofing in McGregor (76657)

McGregor properties vary more than most towns this size. In town, you have older homes on generous lots with mature pecans and live oaks, where shade is welcome but falling limbs and debris are a real roofing concern. On the edges of town and out in the rural parts of McLennan County, you have barns, shops, and farm buildings on the Blackland Prairie, where the ground can hold water after a heavy rain and access for crews and equipment takes some planning. The Brazos River bottomland nearby adds humidity and occasional flood-plain considerations, and the open prairie means wind-driven rain and hail hit roofs at full force. We size fasteners, flashing, and panel profiles for those conditions, and we pay attention to drainage away from foundations on sloped lots.

Our team has installed, repaired, and replaced metal roofing across McGregor and the greater Waco area, from simple corrugated panel on a shop to standing seam on a modern farmhouse. We know the local building department and the inspection rhythm here, and we can help you document a storm claim if hail or wind has damaged your roof.

Our services in McGregor

How a Job Works in McGregor

Step 1: Call us at (254) 384-8413 or request a free estimate online. We schedule an on-site assessment at your McGregor property, look at the roof, the decking, the flashing, and the access, and give you a clear written scope and price. No pressure, no surprises.

Step 2: Once you approve, we pull the required roofing permit through the local jurisdiction and schedule the work. On tighter in-town lots we plan material staging carefully, and on rural properties we coordinate around gates, livestock, and equipment. If your home is in an HOA or a historic review area, we help you choose a panel profile and color that will pass review before we order materials.

Step 3: We finish with a full cleanup, magnet sweep for nails, and a walkthrough with you. We leave your property clean and show you exactly what was done, so you know your roof is ready for the next Texas storm season.

Pricing in McGregor depends on the job. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and metal over existing shingles (retrofit) around $7. Corrugated and ribbed panel roofing starts around $5.50 per square foot, which is often the right choice for barns and shops. Repairs and leak repairs start around $450, screw replacement and re-fastening around $750, and coating or painting around $2.50 per square foot. Flashing, chimney, and skylight work starts around $600, and gutters for metal roofs run about $9 per linear foot. The main cost factors are roof size and pitch, access, condition of the decking, and how urgent the job is. Call (254) 384-8413 for a free estimate on your McGregor property.

✅ Metal Roofing Alliance Member, licensed and insured for work in McGregor and nearby areas.

My barn or shop out on the Blackland Prairie has corrugated panels that are starting to leak at the fasteners. Can you fix that without a full replacement?
Yes. In most cases we can replace the failed screws with new fasteners and washers, reseal the penetrations, and check the panels for wind damage. If the panels themselves are rusted through or bent, we will tell you honestly whether a repair or a panel replacement makes more sense. We work on agricultural and commercial metal roofs throughout the McGregor area.
A storm just took off some panels on my roof in McGregor. How fast can you get out here?
We prioritize active leaks and storm damage. Call (254) 384-8413 and we will schedule the soonest available inspection, often same or next day depending on weather and workload. We can tarp or secure the roof if needed and give you a written estimate for the permanent repair.
What does a typical metal roof replacement cost for a home in McGregor?
Most residential replacements fall in the range of $9 to $10 per square foot for the roofing itself, so a typical 2,000 square foot roof might land roughly in the high teens to low twenties in total, depending on pitch, access, and whether we remove the old shingles. We give you an exact number after a free on-site assessment.
Do I need a permit for a new metal roof in McGregor, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and the rules and fees are set by the local jurisdiction. We handle the permit application and inspections as part of the job. For specific requirements, check with the City of McGregor website or the McLennan County offices, and we will confirm the details before we start.
My neighbor's trees drop limbs on my roof and the property line is close. Can you work around that and does the HOA need to approve the color?
We deal with tight property lines and overhanging trees regularly in McGregor. We plan staging and access to stay on your side of the line and protect the neighbor's property. If your subdivision has an HOA, we help you submit the panel profile and color for approval before ordering materials, so there are no surprises.
Are you insured for work on my McGregor property?
Yes. We are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance before we start work on your home, barn, or commercial building.
What maintenance does a metal roof need in McGregor's climate?
The main things are checking fasteners and washers after big hail or wind events, clearing debris from valleys and gutters, and touching up any scratched paint or coating. Because of the intense sun and spring storms here, we recommend an inspection after major weather. We offer free estimates on inspections and can set up a simple maintenance plan.
Why choose us?

Trusted professionals in Waco

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Waco

All your work handled by qualified professionals in Waco

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Waco

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Waco · Response within 24h · No commitment · ☎ (254) 384-8413

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Waco ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm