In Waco, metal roofing installation typically starts around $8 per square foot, while repairs begin at $450, but your actual price depends on factors like roof size, material choice, and complexity. We believe in transparent pricing so you can plan with confidence, and we're here to guide you every step of the way.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Waco and Central Texas. Class 4 impact-rated panel systems built for hail, tornado-season wind and intense summer sun, installed over premium synthetic underlayment with proper ventilation for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems. The premium choice for Waco homes and the black standing seam of the modern farmhouse look. Panels roll-formed to length and mechanically seamed, with no exposed screws and Class 4 impact options. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of hail-beaten shingle or end-of-life metal roofs. Old roofing hauled away, decking inspected and repaired, then a complete impact-rated metal system installed. Many Texas insurers discount Class 4 roofs, ask your carrier. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles. No tear-off, less waste, lower cost, popular on Waco brick ranches. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing. Replacing hail-dented or wind-torn panels. Resealing seams and penetrations, and fixing failed flashing before the next spring storm finds its way inside. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs. Leaks traced to their true source (failed fasteners. Seam separation, flashing gaps, pipe boots and skylights) and fixed right, not just caulked over. Emergency tarping available after hail and tornado storms. |
| Screw Replacement & Re-Fastening | From $750 | Central Texas heat and big temperature swings crack washers and loosen screws on older exposed-fastener roofs. Across the Blackland Prairie, that is the top cause of slow leaks on farmhouses, barns and shops. Oversized screws and new washers fix it for a fraction of the cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V). The workhorse for barns. Shops, carports and farmhouses across McLennan County and the Blackland Prairie. Quality panels in reflective colors, installed with proper screw patterns and closures. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles. Slate or shake with the lifespan and hail resistance of steel, a favorite for Waco homeowners who want impact-rated metal with a traditional look. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish. Among the best hail performers available, Class 4 impact and Class A fire ratings, and shake or tile profiles that suit Waco's stone and brick homes. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for bay windows, porches, turrets and full architectural roofs. Premium metals that suit the Victorian homes of Castle Heights and Sanger Heights. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or rusted metal roofs. Surface prep. Rust treatment and high-performance reflective coating systems that cut summer heat gain and extend roof life 10-15 years on homes, barns and shops. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys and wall transitions. The number one leak point on Waco roofs in wind-driven storms. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Snow guards are rarely needed in Waco, but low-profile guards still help on steep metal roofs. They hold back rare ice storms like February 2021 and keep packed hail from sliding off at once above entries. Honest guidance on whether yours needs them. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, tornado and straight-line wind damage to metal roofing. Thorough documentation with photos, honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements. Hail damage, fastener condition, seam integrity, flashing and coating wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing. Hangers that work with panel profiles, oversized downspouts for spring downpours and details that stand up to hail. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, shops, churches, event barns and light commercial buildings across Waco and Central Texas. From Blackland Prairie farms to shops and venues in town, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, and complex designs with multiple slopes, valleys, or penetrations can increase installation time and cost.
- Material type and gauge : Standing seam, corrugated panels, stone-coated steel, and copper vary significantly in price per square foot. Thicker gauges and premium finishes also add to the cost.
- Accessibility and roof height : Steep roofs, multi-story homes, or limited access can require additional safety measures and equipment, which may affect labor costs.
- Condition of existing roof : If removal of old roofing is needed, or if underlying decking requires repair, this adds to the overall project cost.
What's included
- Travel included across the Waco area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage and details about its current condition ready before you call. Our estimates include a thorough inspection, material and labor breakdown, and a clear timeline, with no hidden fees. Call (254) 384-8413 to schedule your free estimate and discuss your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type, roof complexity, home height, and whether removal of the old roof is needed. For example, corrugated panels start at $5.50 per square foot, while copper roofing starts at $20 per square foot. We provide a detailed estimate tailored to your specific situation.
Do you offer free estimates?
Yes, we offer free estimates for metal roof installation, replacement, and most repair services. Call (254) 384-8413 to schedule your appointment at a convenient time.
What payment methods do you accept?
We accept cash, checks, and major credit cards. We also offer financing options to help make your project more affordable. Contact us at (254) 384-8413 for more details on payment and financing.